Mesh & Bar Pty Ltd use 500 Mpa Reinforcing Steel from both long bar and coil products that are manufactured from fully recycled material. Our Reinforcing Steel is available in diameters ranging from 10mm – 36mm, each of these diameters are available in a variety of stock lengths – 6, 9, & 12 metres.
Should you have any specific requirements, we have the capacity to cut and bend our reinforcement to address your specific needs.
Larger diameter (40mm) 500 Mpa is also available upon request, along with special run bar lengths for most diameters. Please note these requests require additional lead-times and minimum quantity runs.
We are also able to supply smaller diameter material in 250 Mpa grade plain round bar.
For more information on any of the above, please contact your local Mesh & Bar office.
Reinforcing Bars (250R)
| SIZE (mm) | GRADE DESCRIPTION | STOCK LENGTH |
|---|---|---|
| R6 | 250 R Plain Round Bar | 6M |
| R10 | 250 R Plain Round Bar | 6M |
| R12 | 250 R Plain Round Bar | 6M |
| R16 | 250 R Plain Round Bar | 6M |
| R20 | 250 R Plain Round Bar | 6M |
| R24 | 2500R Plain Round Bar | 6M |
| R28 & R33 | Available by special order only |
Reinforcing Bars (500N)
| SIZE (mm) | GRADE DESCRIPTION | STOCK LENGTH |
|---|---|---|
| N12 | 500 N Deformed Bar | 6M 9M & 12M |
| N16 | 500 N Deformed Bar | 6M 9M & 12M |
| N20 | 500 N Deformed Bar | 6M & 12M |
| N24 | 500 N Deformed Bar | 12M |
| N28 | 500 N Deformed Bar | 12M |
| N32 | 500 N Deformed Bar | 12M |
| N36 | 500 N Deformed Bar | 12M |
Pool Steel (250S)
| SIZE (mm) | GRADE DESCRIPTION | STOCK LENGTH |
|---|---|---|
| S12 | 250 S Deformed Pool Bar | 6M & 9M |
Starter Bars
| PRODUCT CODE | SIZE (mm) | BAR SIZE (mm) | BEND ANGLE |
|---|---|---|---|
| N12SB1020 | 1000×2000 | 12 | 90° |
| N16SB1020 | 1000×2000 | 16 | 90° |
| N16CB6060 | 600×600 | 16 | 90° |
Please note: This product is not a stocked item, but can be ordered upon request.